Acamthai - Wood Screws

Wood Screws

หมวด: Machine Screw

Wood Screws

Head:	Pan Head, Flat Head
Color:	Blue Zinc, Yellow Zinc,Black Oxide

Table1 Dimensions of Threads and Body Diameters for Wood Screws

Nominal Size or Basic Screw Diameter		Threads Per Inch	D		E		E1		F
			Thread Major Diameter		Body Diameter (Cut Thread)		Body Diameter (Rolled Thread)		Thread Depth
			Max	Min	Max	Min	Max	Min	Min
0	0.060	32	0.064	0.053	0.064	0.053	0.055	0.044	0.010
1	0.073	28	0.077	0.066	0.077	0.066	0.066	0.055	0.010
2	0.086	26	0.090	0.079	0.090	0.079	0.075	0.064	0.010
3	0.099	24	0.103	0.092	0.103	0.092	0.086	0.075	0.014
4	0.112	22	0.116	0.105	0.116	0.105	0.095	0.084	0.016
5	0.125	20	0.129	0.118	0.129	0.118	0.107	0.096	0.018
6	0.138	18	0.142	0.131	0.142	0.131	0.118	0.107	0.020
7	0.151	16	0.155	0.144	0.155	0.144	0.127	0.116	0.022
8	0.164	15	0.168	0.157	0.168	0.157	0.136	0.125	0.023
9	0.177	14	0.181	0.170	0.181	0.170	0.147	0.136	0.026
10	0.190	13	0.194	0.183	0.194	0.183	0.157	0.146	0.030
12	0.216	11	0.220	0.209	0.220	0.209	0.176	0.165	0.031
14	0.242	10	0.246	0.235	0.246	0.235	0.201	0.190	0.035
16	0.268	9	0.272	0.261	0.272	0.261	0.214	0.203	0.035
18	0.294	8	0.298	0.287	0.298	0.287	0.237	0.226	0.042
20	0.320	8	0.324	0.313	0.324	0.313	0.260	0.249	0.046
24	0.372	7	0.376	0.365	0.376	0.365	0.303	0.292	0.050
See Notes	1.5	2

Notes:

Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.
The maximum permissible variation in the number of threads per inch shall be plus or minus 10 percent of that which is tabulated for the respective screw size.
Cut thread type screws are usually supplied with single lead threads for all screw lengths.
Rolled thread type screws may be supplied with either single lead or double lead threads at the option of the manufacturer, however, single lead threads are preferred where the nominal length of the screw is shorter than four times the basic screw diameter. Points be sharp, however, no extrusion of excess material beyond the apex of point resulting from thread rolling shall be permissible.

Sunday the 22nd.